-40%
AM/CW/DIGITAL LINEAR AMPLIFIER 800W MF/HF 0.4-3MHz
AM/CW/DIGITAL LINEAR AMPLIFIER 800W MF/HF 0.4-3MHz
AM/CW/DIGITAL LINEAR AMPLIFIER 800W MF/HF 0.4-3MHz

AM/CW/DIGITAL LINEAR AMPLIFIER 800W MF/HF 0.4-3MHz

$ 66

Availability: 13 in stock
  • Type: Linear Amplifier
  • Audio Inputs: AM
  • Condition: New
  • Power: 800 W
  • Model: 800w
  • Brand: DX WORLD-e
  • Band: HF
  • All returns accepted: ReturnsNotAccepted
  • Supported Modes: CW

    Description

    DX WORLD ELECTRONICS
    MF/HF 400KHz-3MHz AMPLIFIER BOARD WITH MOSFETS
    RF INPUT: 0-10W MAX
    RF OUTPUT:
    -AM MODE 0-200W (800W PEP)
    -CW MODE 0-800W
    -ALL DIGITAL MODES 0-300W
    ADJUST INPUT DRIVE FOR EACH MODE YOU WILL USE.
    CAN USE IT ON CW/DIGITAL MODES 630M-160M BANDS OR AM MODE ON MEDIUM WAVES FOR BROADCASTING.
    CAN WORK 100% DUTY CYCLE NON STOP.
    POWER SUPPLY 48-60V 25A
    MOSFETS 6x IRFP360
    BOARD SIZE WITH MOSFETS 100X135mm
    HEATSINK NOT INCLUDED
    Note for cooling: Heatsink use for normal hamradio operation need at least 150x150x40mm and 10mm thick (the bigger the better).
    To have good cooling for very long broadcasting etc. is good to use two heatsinks one for each 3 mosfets so you can mount them directly with no isolation between the mosfets and heatsink.this way will have better heat transfer.But heatsinks must not touch each other and not touch the chassis.so will need to isolate the heatsinks from the chassis box you will use.
    YOUTUBE CHANNEL: DX WORLD ELECTRONICS
    TEST VIDEO TITTLE: AM/CW/DIGI AMPLIFIER 800W PEP
    THANK YOU
    SV2RIF
    SV2RKF